Full-Time Faculty

Basic Introduction:

Shi SHI received her bachelor’s and master’s degree from School of Materials Science and Engineering, University of Science & Technology Beijing, and Ph.D. degree in Materials Science from Hokkaido University in March 2015, after then a postdoc in UW-Madison. Dr. Shi currently works as an engineer in School of Environmental Science & Engineering, managing ESEM and optical instruments. Her research interests include synthesis and analysis of functional materials, advanced characterization techniques and in-situ microscope.

Professional Experience:

2021.03-present   Engineer, SUSTC School of Environmental Sciences and Engineering

2019.06-2021.03  Associate research fellow, College of Civil and Transportation Engineering, Shenzhen University

2018.08-2019.05  Visiting scholar, SUSTC Department of Mechanical and Energy Engineering

2016.12- 2018.05  DOE Office of Basic Energy Sciences, Energy Frontier Research Centers，EFRC Early Career Network representative2015.04- 2018.06  Postdoctoral Fellow, University of Wisconsin-Madison 

Education:

2012.04-2015.03 Ph.D., Materials Science, Hokkaido University 

2009.09-2012.01 M.S., Materials Science and Engineering, University of Science & Technology Beijing

2005.09-2009.07 B.S., Materials Chemistry, University of Science & Technology Beijing

Research Interests:

·  Synthesis and analysis of functional materials

·  Advanced characterization techniques

·  In-situ microscope

Published Works:

1.  龙武剑，明高林，董必钦，符显珠，骆静利，施诗. 改性TiO2的光生阴极保护研究进展 [J] .材料导报（中文版），2021，已收稿.

2.  Xinwei Li, Shi Shi, Shuang Han, Xiaogang Hu, Qiang Zhu, Hongxing Lu, Wenwu Li, Yusheng Shi, and Hui Ding, Microstructure, solidification behavior and mechanical properties of Al-Si-Mg-Ti/TiC fabricated by selective laser melting, Additive Manufacturing, 2020, 101326.

3.  Chuan Guo, Sheng Li, Shi Shi, Xinggang Li, Xiaogang Hu, Qiang Zhu, and R. Mark Ward, Effect of processing parameters on surface roughness, porosity and cracking of as-built IN738LC parts fabricated by laser powder bed fusion, Journal of Materials Processing Technology, 2020, 116788.

4.  Chuan Guo, Zhen Xu, Yang Zhou, Shi Shi, Gan Li, Hongxing Lu, Qiang Zhu, Single-track investigation of IN738LC superalloy fabricated by laser powder bed fusion: Track morphology, bead characteristics and part quality, Journal of Materials Processing Technology, 2020, 117000.

5.  Shi Shi*, Mo-Rigen He, Ke Jin, Hongbin Bei, and Ian M. Robertson, Evolution of ion damage at 773K in Ni-containing concentrated solid-solution alloys, Journal of Nuclear Materials, 2018, 501, 132–142.

6.  Shi Shi*, Hongbin Bei, and Ian M. Robertson, Impact of alloy composition on one-dimensional glide of small dislocation loops in concentrated solid solution alloys, Materials Science and Engineering: A, 2017, 700, 617–621.

7.  Mo-Rigen He, Shuai Wang, Shi Shi, Ke Jin, Hongbin Bei, Kazuhiro Yasuda, Syo Matsumura, Kenji Higashida, and Ian M. Robertson, Mechanisms of radiation-induced segregation in CrFeCoNi-based single-phase concentrated solid solution alloys, Acta Materialia, 2017, 126, 182–193.

8.  Chenyang Lu, Liangliang Niu, Nanjun Chen, Ke Jin, Taini Yang, Pengyuan Xiu, Yanwen Zhang, Fei Gao, Hongbin Bei, Shi Shi, Mo-Rigen He, Ian M. Robertson, William J. Weber and Lumin Wang, Enhancing radiation tolerance by controlling defect mobility and migration pathways in multicomponent single-phase alloys, Nature Communications, 2016, 7: 13564.